A 2 mm drift is a handy tool for installing or removing the spring
pin from the AUD0011 Tail Pulley, which mounted to the AUD1004 Tail
Output Shaft of the Tiger 50 or Pantera 50 model
helicopters. Make up a simple wooden jig to hold the parts so you
don't need to grow a third hand!
- This tool, PDR0095 is a parallel ground
2mm drift and is what you need to do the job easily.
- The hole gives the AUD3066 Spring
Pin a place to go when you tap it out during disassembly.
- Setting the assembly into the jig holds
the parts so you can drive the spring pin home.
|